skip to content

Composites and Coatings Group

Department of Materials Science & Metallurgy
 

A Procedure for Extracting Primary and Secondary Creep Parameters from Nanoindentation Data

J. Dean, A. Bradbury, G. Aldrich-Smith & T. W. Clyne

Mechanics of Materials 65 (2013) 124-134

 

Deposition of Ingested Volcanic Ash on Surfaces in the Turbine of a Small Jet Engine

M. Shinozaki, K. A. Roberts, B. van de Goor & T. W. Clyne

Advanced Engineering Materials (2013) 10.1002/adem.201200357

 

Electrical monitoring of crack propagation during quasi-static loading and ballistic impact of alumina plates

E. K. Oberg, C. S. Dunleavy, P. Bourke & T. W. Clyne

J. European Ceramic Soc. 33 (2013) 2663–2675

 

The effect of vermiculite on the degradation and spallation of plasma sprayed thermal barrier coatings

M. Shinozaki & T. W. Clyne

Surface & Coatings Techn. 216 (2013) 172–177

 

A methodology, based on sintering-induced stiffening, for prediction of the spallation lifetime of plasma-sprayed coatings

M. Shinozaki & T. W. Clyne

Acta Mater. 61 (2013) 579–588

 

Time dependent statistics of plasma discharge parameters during bulk AC plasma electrolytic oxidation of aluminium

C. S. Dunleavy, J. A. Curran, T. W. Clyne

Applied Surface Science, 268 (2013) 397-409