2002 - 2009 Papers

Griffiths, H. (2009). Development of Centrifugation as a Technique for Measuring Cell-Substrate Adhesion and Its Use In The Comparison of Potential, Titanium-Based, Implant Materials. Department of Materials Science and Metallurgy, University of Cambridge. PhD.

Dunleavy, C. S., I. O. Golosnoy, et al. (2009). "Characterisation of discharge events during plasma electrolytic oxidation." Surface and Coatings Technology 203: 3410–3419.

Evans, L. A. (2009). Finite Element Analysis of the Accelerated Buoyancy Test for Study of the Adhesion of Cells. Materials Science and Metallurgy. Cambridge, Cambridge. MSci: 34.

Paul, S., A. Cipitria, et al. (2009). "Sintering Characteristics of Plasma Sprayed Zirconia Coatings containing different Stabilisers." Surf. Coat. Techn. 203: 1069-1074.

Golosnoy, I. O., A. Cipitria, et al. (2009). "Heat Transfer Through Plasma-Sprayed Thermal Barrier Coatings in Gas Turbines : A Review of Recent Work." Journal of Thermal Spray Technology 18(December): 809-821.

Dean, J., C. S. Dunleavy, et al. (2009). "Energy Absorption during Projectile Perforation of Thin Steel Plates and the Kinetic Energy of Ejected Fragments." Int. J. Impact Engineering 36(10-11): 1250-1258.

Cipitria, A., I. O. Golosnoy, et al. (2009). "A Sintering Model for Plasma-Sprayed Zirconia TBCs. Part I: Free-Standing Coatings." Acta Mater. 57: 980–992.

Cipitria, A., I. O. Golosnoy, et al. (2009). "A Sintering Model for Plasma-Sprayed Zirconia TBCs. Part II: Coatings bonded to a Rigid Substrate." Acta Mater. 57: 993–1003.

Dean, J., J. M. Wheeler, et al. (2008). "Using Impact Nanoindentation to Investigate the High Strain Rate Response of Superelastic Shape Memory Alloys." International Journal of Mechanical Sciences Submitted.

Dean, J., J. M. Wheeler, et al. (2008). "A Preliminary Study of the use of Impact Nanoindentation, Coupled with FEM Modelling, to obtain High Strain Rate Constitutive Relations." Acta Mater. submitted.

Golosnoy, I. O., A. Cockburn, et al. (2008). "Optimisation of Metallic Fibre Network Materials for Compact Heat Exchangers." Adv. Eng. Mater. 10: 210-218.

Golosnoy, I. O., S. Paul, et al. (2008). "Modelling of Gas Permeation through Creamic Coatings produced by Thermal Spraying." Acta Mater. 56(4): 874-883.

Golosnoy, I. O., J. C. Tan, et al. (2008). "Ferrous Fibre Network Materials for Noise Reduction in Gas Turbine Aeroengines, Part I: Acoustic Effects." Adv. Eng. Mater. 10: 192-200.

Griffiths, H. J., J. Dean, et al. (2008). Characterisation of Cell Adhesion to Substrate Materials and the Resistance to Enzymatic and Mechanical Cell-Removal. MRS-Spring, San Francisco, MRS.

Griffiths, H. J., J. G. Harvey, et al. (2008). "Characterisation of Cell Adhesion to Substrate Materials and the Resistance to Enzymatic and Mechanical Cell-Removal." MRS Proceedings 1097E: GG03-05.

Harvey, J. G. (2008). Characterisation of single cells to Ti-based surfaces using forced liquid flow. Department of Materials Science and Metallurgy, University of Cambridge. MSci.

Wheeler, J. M. and T. W. Clyne (2008). "Operation of a Nanoindenter at High Temperature within a Vacuum Chamber." Adv. Eng. Materials in preparation.

Markaki, A. E. and T. W. Clyne (2008). Stainless Steel Sandwich Sheets with Fibrous Metal Cores. Automotive Engineering: Lightweight, Functional and Novel Materials. P. Grant, C. Johnston and B. Cantor, Taylor & Francis. Chapter 14: 149-175.

Markaki, A. E., K. M. Knowles, et al. (2008). "Terracing on Ferritic Stainless Steel Fibres and its Influence on Cell Adhesion and Proliferation." Acta Materiali submitted.

Markaki, A. E., K. M. Knowles, et al. (2008). "Terracing on Ferritic Stainless Steel Fibres and its Influence on Cell Adhesion and Proliferation." Acta Mater. submitted.

Paul, S., A. Cipitria, et al. (2008). "Sintering Characteristics of Plasma Sprayed Zirconia Coatings containing different Stabilisers." Surf. Coat. Techn. submitted.

Tan, J. C. and T. W. Clyne (2008). "Ferrous Fibre Network Materials for Noise Reduction in Gas Turbine Aeroengines, Part II: Thermomechanical Stability." Adv. Eng. Mater. 10: 201-209.

Muir Wood, A. J., S. Sanjabi, et al. (2008). "Nanoindentation of Binary and Ternary Ni–Ti-based Shape Memory Alloy Thin Film." Surface & Coatings Technology 202: 3115-3120.

Tan, J. C., S. A. Westgate, et al. (2007). "Resistance Welding of Thin Stainless Steel Sandwich Sheets with Fibrous Metallic Cores: Experimental and Numerical Studies." Science and Technology of Welding and Joining 12(6): 490-504.

Paul, S., I. O. Golosnoy, et al. (2007). Effect of Heat Treatment on Pore Architecture and Associated Property Changes in Plasma Sprayed TBCs. International Thermal Spray Conference, Beijing, China, ASM International, Materials Park, Ohio, USA.

Illingworth, T. C., I. O. Golosnoy, et al. (2007). "Modelling of Transient Liquid Phase Bonding in Binary Systems - A New Parametric Study." Mat. Sci. Eng. A 445–446: 493–500.

Brown, P., L. Marston, et al. (2007). "Stainless Steel Sandwich." Materials World 15(2): 26-28.

Cipitria, A., I. O. Golosnoy, et al. (2007). Sintering Kinetics of Plasma-Sprayed Zirconia TBCs. International Thermal Spray Conference, Beijing, China, ASM International.

Cipitria, A., I. O. Golosnoy, et al. (2007). "Sintering Kinetics of Plasma-Sprayed Zirconia TBCs." Journal of Thermal Spray Technology 16(5-6): 809-815.

Clyne, T. W. (2007). "DoITPoMS TLP - Superelasticity and the Shape Memory Effect." 2008, from http://www.doitpoms.ac.uk/tlplib-dev2008/superelasticity/shape_memory1.php.

Clyne, T. W. (2007). TA Handout on Superelasticity and the Shape Memory Effect, University of Cambridge.

Paul, S. (2007). Pore Architecture in Ceramic Thermal Barrier Coatings. Materials Science & Metallurgy. Cambridge, University of Cambridge: 1-217.

Paul, S., A. Cipitria, et al. (2007). "Effects of Impurity Content on the Sintering Characteristics of Plasma Sprayed Zirconia." Journal of Thermal Spray Technology 16(5-6): 798-803.

Curran, J. A., H. Kalkanci, et al. (2007). "Mullite-rich plasma electrolytic oxide coatings for thermal barrier applications." Surface and Coatings Technology 201(21): 8683-8687.

Plati, A., J. C. Tan, et al. (2006). "Residual Stress Generation During Laser Cladding of Steel with a Particulate Metal Matrix Composite." Advanced Engineering Materials 8(7): 619-624.

Clifford, S. M., J. A. Curran, et al. (2006). Abrasive Wear Testing of Steel and Plasma Electrolytic Oxidation-treated Aluminium. IoM3 Materials Congress, Carlton House Terrace, London.

Clyne, T. W., I. O. Golosnoy, et al. (2006). "Porous Materials for Thermal Management under Extreme Conditions." Philosophical Transactions of the Royal Society A - Mathematical Physical and Engineering Sciences 364(1838): 125-146.

Curran, J. A. and T. W. Clyne (2006). "Porosity in plasma electrolytic oxide coatings." Acta Materialia 54: 1985-1993.

Goodall, R. and T. W. Clyne (2006). "A Critical Appraisal of the Extraction of Creep Parameters from Nanoindentation Data obtained at Room Temperature." Acta Materialia 54(20): 5489-5499.

Tan, J. C., J. A. Elliott, et al. (2006). "Analysis of Tomography Images of Bonded Fibre Networks to Measure Distributions of Fibre Segment Length and Fibre Orientation." Adv. Eng. Mater. 8(6): 495-500.

Muir Wood, A. and T. Clyne (2006). "Measurement and Modelling of the Nanoindentation Response of Shape Memory Alloys." Acta Materialia 54(20): 5607-5615.

Muir Wood, A. J. and T. W. Clyne (2006). "Measurement and Modelling of the Nanoindentation Response of Shape Memory Alloys." Acta Materialia 54(20): 5607-5615.

Tan, J. C., S. A. Tsipas, et al. (2006). "A Steady-State Bi-Substrate Technique for Measurement of the Thermal Conductivity of Ceramic Coatings." Surf. Coat. Techn. 201(3-4): 1414-1420.

Tan, J. C., S. A. Tsipas, et al. (2006). "A Steady-State Bi-Substrate Technique for Measurement of the Thermal Conductivity of Ceramic Coatings." Surf. Coat. Techn. 201(3-4): 1414-1420.

Clyne, T. W., A. E. Markaki, et al. (2005). "Mechanical and Magnetic Properties of Metal Fibre Networks, with and without a Polymeric Matrix." Comp. Sci. Tech. 65(15-16): 2492-2499.

Curran, J. A. and T. W. Clyne (2005). "The thermal conductivity of plasma electrolytic oxide coatings on aluminium and magnesium." Surface and Coatings Technology 199: 177-183.

Curran, J. A. and T. W. Clyne (2005). "Thermo-physical properties of plasma electrolytic oxide coatings on aluminium." Surface and Coatings Technology 199: 168-176.

Golosnoy, I. O., S. A. Tsipas, et al. (2005). "An Analytical Model for Simulation of Heat Flow in Plasma Sprayed Thermal Barrier Coatings." J. Thermal Spray Technology 14(2): 205-214.

Illingworth, T. C., I. O. Golosnoy, et al. (2005). "Numerical Modelling of Transient Liquid Phase Bonding and Other Diffusion Controlled Phase Changes." J. Mater. Sci. 40(9/10): 2505-2511.

Markaki, A. E. and T. W. Clyne (2005). "Magneto-Mechanical Actuation of Bonded Ferromagnetic Fibre Arrays." Acta Mater. 53(3): 877-889.

Markaki, A. E. and T. W. Clyne (2005). Magneto-Mechanical Bone Growth Stimulation. SPIE International Symposium on Smart Materials Nano-, and Micro-Smart Systems, Biomedical Applications of Micro- and Nanoengineering II, Sydney, Australia, SPIE-INT Society Optical Engineering.

Markaki, A. E. and T. W. Clyne (2005). Magneto-Mechanical Stimulation of Bone Growth. Encyclopedia of Materials Science and Technology – Updates. K. H. J. Buschow, R. W. Chan, M. C. Flemingset al, Elsevier: 1-6.

Markaki, A. E., P. Colombo, et al. (2005). Highly Porous Cellular Metals and Ceramics: Thermo-Mechanical Properties. Encyclopedia of Condensed Matter Physics. F. Bassani, G. J. Liedl and P. Wyder. Oxford, Elsevier. 2: 318-332.

Pang, W., H. C. Man, et al. (2005). "Laser surface coating of Mo–WC metal matrix composite on Ti6Al4V alloy." Materials Science & Engineering A 390(1-2): 144-153.

Tan, J. C. (2005). Thermo-Electrical Properties of Metallic Sandwich Sheets and their Resistance Welding Characteristics. Department of Materials. Cambridge, University of Cambridge: 163.

Li, H., B. S. Ng, et al. (2004). "Raman Spectroscopy determination of Phases within Thermal Sprayed Hydroxyapatite Splats and subsequent in vitro Dissolution Examination." Acta Mater. 52: 445–453.

Galvan, D., V. Ocelik, et al. (2004). "Microstructure and Properties of TiB/Ti-6Al-4V Coatings Produced With Laser Treatments." Journal of Materials Engineering and Performance 13(4): 406-412.

Fox, A. C. and T. W. Clyne (2004). "Oxygen Transport through the Zirconia Layer in Plasma Sprayed Thermal Barrier Coatings." Surface & Coatings Technology 184: 311-321.

Gergely, V. and T. W. Clyne (2004). "Drainage in Standing Liquid Metal Foams: Modelling and Experimental Observations." Acta Mater. 52: 3047-3058.

Markaki, A. E. and T. W. Clyne (2004). "Magneto-Mechanical Stimulation of Bone Growth in a Bonded Array of Ferromagnetic Fibres." Biomaterials 25(19): 4805-4815.

Man, H. C., Y. Q. Yang, et al. (2004). "Laser induced reaction synthesis of TiC+WC reinforced metal matrix composites coatings on Al 6061." Sur. Coat. Technol. 185(1): 74-80.

Shortall, C. D. S. (2004). Mechanical and Magnetic Response of Porous and Composite Fibre-Based Material. Department of Materials. Cambridge, University of Cambridge: 106.

Tan, J. C., S. A. Westgate, et al. (2004). Modelling of Mechanical and Transport Properties during Resistance Spot Welding (RSW) of a Novel Ultra-Light Stainless Steel Sandwich Sheet. 3rd International Conference on Computational Modelling and Simulation of Materials, Sicily, Italy, Techna Group srl.

Voisey, K. T. and T. W. Clyne (2004). "Laser Drilling Of Cooling Holes Through Plasma Sprayed Thermal Barrier Coatings." Surf. & Coat. Techn. 176: 296-306.

Tsipas, S. A., I. O. Golosnoy, et al. (2004). "The Effect of a High Thermal Gradient on Sintering and Stiffening in the Top Coat of a Thermal Barrier Coating (TBC) System." J. Therm. Spray Technol. 13(3): 370-376.

Muir Wood, A. J., J.-H. You, et al. (2004). Nanoindentation response of superelastic materials. Smart Materials, Nano-, and Micro-Smart Systems: Smart Materials III, Sydney, SPIE.

Muir Wood, A. J., V. Gergely, et al. (2004). Indentation characteristics of superelastic nickel-titanium wires and a preliminary study of copper-bonded joints between them. Smart Structures and Materials 2004: Active Materials: Behavior and Mechanics, San Diego, SPIE.

Muir Wood, A. J., T. C. Illingworth, et al. (2003). Novel Ti-based Porous Materials for High-Strength Applications: Liquid Phase Bonding of Ti and Ti-Ni Wires. Cambridge, Department of Materials Science and Metallurgy, University of Cambridge.

Voisey, K. T. and T. W. Clyne (2003). "Laser Drilling Induced Cracking." to be submitted to Optics and Lasers in Engineering.

Tsipas, S. A., I. O. Golosnoy, et al. (2003). The Effect of a High Thermal Gradient on Sintering and Stiffening in the Top Coat of a Thermal Barrier Coating (TBC) System. International Thermal Spray Conference 2003, Orlando, Florida, USA, ASM International.

Berns, H. (2003). "Comparison of wear resistant MMC and white cast iron." Wear 254(1-2): 47-54.

Fouquet, S. and T. W. Clyne (2003). "Fibre Swelling during Laser Drilling of Carbon Fibre Composites." to be submitted to J. Laser Apps.

Markaki, A. E. and T. W. Clyne (2003). "Mechanics of Thin Ultra-Light Stainless Steel Sandwich Sheet Material: Part I - Stiffness." Acta Mater. 51(5): 1341-1350.

Markaki, A. E. and T. W. Clyne (2003). "Mechanics of Thin Ultra-Light Stainless Steel Sandwich Sheet Material: Part II - Resistance to Delamination." Acta Materialia 51(5): 1351-1357.

Clyne, T. W. and V. Gergely (2003). Processes of Surface Treating or Coating Fibres. Great Britain, University of Cambridge.

Gergely, V., D. C. Curran, et al. (2003). "The FOAMCARP Process: Foaming Of Aluminium MMCS by the Chalk-Aluminium Reaction in Precursors." Comp. Sci. Tech. 63(Special issue on porous materials): 2301-2310.

Markaki, A. E., V. Gergely, et al. (2003). "Production of a Highly Porous Material by Liquid Phase Sintering of Short Ferritic Stainless Steel Fibres and a Preliminary Study of its Mechanical Behaviour." Comp. Sci. Tech. 63(16): 2345-2351.

Roy, D. and T. W. Clyne (2003). "Evaluation of Stresses in Diamond Films using Raman Spectroscopy and X-ray Diffraction." Thin Solid Films submitted.

Roy, D. and T. W. Clyne (2003). "On the Origin of the 1150 cm-1 and 1500 cm-1 Raman Peaks fron Nanocrystalline Diamond." Phys. Rev. B submitted.

Clifford, S. M., C. I. C. Manger, et al. (2002). "Characterisation of a glass-fibre reinforced vinylester to steel joint for use between a naval GRP superstructure and a steel hull." COMPOS STRUCT 57: 59-66.

Fox, A. C. and T. W. Clyne (2002). "Oxygen Transport through the Zirconia Layer in Plasma Sprayed Thermal Barrier Coatings." Surf. & Coat. Techn.: in press.

Frei, J., V. Gergely, et al. (2002). "The Effect of Prior Deformation on the Foaming Behavior of "FORMGRIP" Precursor Material." Adv. Eng. Mater. 4(10): 749-752.

Gergely, V., D. C. Curran, et al. (2002). Advances in the Melt Route Production of Closed Cell Aluminium Foams using Gas-Generating Agents. Processing and Properties of Lightweight Cellular Metals and Structures, Seattle, TMS.

Goodall, R., C. Williams, et al. (2002). Thermal Conduction Characteristics of a Novel Highly Porous, Fire-Resistant Material. Affordable Materials Technology - Platform to Global Value and Performance, Long Beach, California, SAMPE.

Goodall, R., C. Williams, et al. (2002). Thermal Expansion and Stiffness Characteristics of a Highly Porous, Fire-Resistant Composite Material. ECCM 10, Brugge, Belgium.

Klocker, T. and T. W. Clyne (2002). "The Effects of Bond Coat Roughness and Top Coat Purity on the Adhesion of Thermal Barrier Coatings." Surface & Coatings Technology: submitted.

Klocker, T. and T. W. Clyne (2002). "Modelling of In-flight Phenomena during Plasma Spraying and Correlation with Observed Deposition Efficiencies and Microstructural Features." J. Therm. Spray Techn.: submitted.

Markaki, A. E. and T. W. Clyne (2002). "Energy Absorption During Failure of Layered Metal Foam / Ceramic Composites." Mat. Sci. & Eng. 323: 260-269.

Markaki, A. E., S. A. Westgate, et al. (2002). The Stiffness and Weldability of an Ultra-Light Steel Sandwich Sheet Material with a Fibrous Metal Core. Processing and Properties of Lightweight Cellular Metals and Structures, Seattle, TMS.